EGR Valve Block Plate for VW Seat Skoda 1.2L 1.6L TDi for Audi Common rail S/S Benz Wing Spoiler 1 x pressure sensor bracket

1 x pressure sensor bracket hardware

Other Part Number: 27108643152

Other Part Number: 551363X

Firstly check that the emergency switch is not active as this switch bypasses the control board and supplies power direct - if this is in correct position and you have large numbers on the digital read out like '60" then try the thermistor as it is more likely then the actual control board

Material: ABS Plastic + Bulb

EGR Valve Block Plate for VW Seat Skoda 1.2L 1.6L TDi for Audi Common rail S/S Benz Wing Spoiler 1 x pressure sensor bracketFeature: This is a laser cut blanking plate, made from 1. 5mm 304 stainless steel. It has been rumbled to make it smooth and give it an abraded surface that gives a better seal, plus removes all sharp edges (so no cutting of the fingers). It gives a cleaner pickup at lower revs because the exhaust gas being recycled. It will put the engine management light on. If the EGR valve has been mapped out of the ECU, then it is best to have the plate without a