Fimco 4006-L 1 1/2 IN 6 ZONE PLASTIC VALVE Steel solenoids 1 above ground FIMCO

solenoids 1 above ground FIMCO valve controls all zones eliminating the need to dig into the ground to locate electric solenoid valve boxes Works either manually or fully automatic with a controller (not included) to turn on and off the water supply (pump or solenoid) Only use standard clear PVC cement (not included) for installation of the valve and allow 2 hours to set before subjecting it to internal water pressure

With 22 nozzle choices

4 in/hr approx

Programmable run times: 1 to 90 minutes

superior distribution

Fimco 4006-L 1 1/2 IN 6 ZONE PLASTIC VALVE Steel solenoids 1 above ground FIMCOThe model #4006 Hydro Indexing Valve has 1 inlet and 6 outlets which are all 1 1 2 slip fit. This valve is recommended for use in a pump driven irrigation system and can run from 2 to 6 zones based on the chosen cam configuration (selected above). Other available options listed above are: The standard flow stem and disc assembly requires a minimum of 10GPM, the low flow stem and disc assembly requires a minimum of only 6GPM.